PDA

View Full Version : Help!!!! Please this is doing my Nut in!


egyptiangothic
12-28-2011, 02:04 PM
<p>Can some one please help me!!! i use the lay out editor and i am self taught i dont ask for help alot  as i try to work it out for my self! but this is realy bugging me  im trying to get my Indium cage bars from..</p><p><img src="http://i1208.photobucket.com/albums/cc361/kianneoftroi/odds%20and%20sodddds/EQ2_000001-1.png" width="1024" height="560" /></p><p>to here...</p><p><img src="http://i1208.photobucket.com/albums/cc361/kianneoftroi/odds%20and%20sodddds/EQ2_000000.png" width="1024" height="560" /></p><p>each time i try to pitch them to a 11.4 degree they start to stand up...</p><p><img src="http://i1208.photobucket.com/albums/cc361/kianneoftroi/odds%20and%20sodddds/EQ2_000003.png" width="1024" height="560" /></p><p>i want them to slope down a tad to make a track.. if i roll the they just turn clock wise, same as rotate... im getting very wound up. im not mathermaticaly inclined so i dont understand x+y+abcd=3 if any one  can help i would greatly appreciate some physical assistance please ... GH =new halas, freeport server, name Llamedos</p><p>kindest regards kianne</p>

LaeliaJS
12-28-2011, 02:31 PM
<p>Pick the cage bars up, then put them back down and save your layout again.  Then set PITCH to 75 (or 80 if you only want a slight slope) and ROLL to 90.  That should give you the look that you want.</p>

egyptiangothic
12-28-2011, 06:20 PM
<p><cite>LaeliaJS wrote:</cite></p><blockquote><p>Pick the cage bars up, then put them back down and save your layout again.  Then set PITCH to 75 (or 80 if you only want a slight slope) and ROLL to 90.  That should give you the look that you want.</p></blockquote><p>YOU ARE MY HERO!!! TY TY TY <img src="/smilies/283a16da79f3aa23fe1025c96295f04f.gif" border="0" alt="SMILEY" /> XX</p>