PDA

View Full Version : Shroud of Kunark


Undacova
03-23-2008, 06:43 AM
Was the change to this ranger buff intentional?On test it reads:Increase <b>In-combat movement speed</b> of caster by 7%Live:Increase <b>speed </b>of caster by 7%.I re-tested by going to my AA mirror on test to make sure my buffs were all clear and then re-applied, and yes my total run speed is lower by 7% (out of combat) on test then it is on live.Is this just a ninja nerf that wasn't mentioned?  Or did I miss it in the test notes.PS. The Arrow mechanics situation is much more important than this!!  See "Arrow Changes" thread.

Gorth
03-23-2008, 02:45 PM
[Removed for Content]? You're [Removed for Content] about gaining an in-combat movement rate? Put down the crackpipe.

Runewind
03-23-2008, 02:50 PM
Actually, he's complaining about losing 7% out of combat runspeed.

Undacova
03-23-2008, 02:55 PM
I have no problem with it if it was meant to be an addition, like our fitness AA.However, as I am on a PvP server, in combat run speed means jack to me.

Runewind
03-23-2008, 02:59 PM
That said... you're wrong. On Live it says "Increases In-Combat Movement speed by 7%" aswell. So uh.... I'm not sure where you're getting your info. I can post [Removed for Content] if you'd like.

Undacova
03-23-2008, 03:15 PM
<img src="http://i25.photobucket.com/albums/c76/eq2kwin/ShroudofKunarkcopy.jpg" border="0" alt="" />I am not saying you are wrong, just saying I am not.  The concern I had was it was not working properly on test.  My runspeed was 7% less on test then live.  That is the issue I wanted to bring up.EDIT: I found the problem.  I was unaware the PvP Test server was currently on a PvE ruleset.  Sorry for the confusion all.

Aeralik
03-23-2008, 03:45 PM
That was a change from awhile back specifically for pvp dealing with some of the high in combat run speeds.  It's not something changed in this update and its not going to the pve servers.

Elephanton
03-25-2008, 10:13 AM
<p>PVP-Test is in PVE mode nowAnd this spell has different effect on PVP and PVE server</p>